Protecting the data stored onto one or more hard disks is very important to any user and there are numerous ways of setting up a certain disk configuration to make sure the information is backed up at all times and the access times are shortened as much as possible.
RAID configurations consist of two or more disks that work together to ensure the availability of the data bits stored onto each drive, but sometimes failures can occur and in such cases a software solution like ReclaiMe Free RAID Recovery could be the only helper to assist user in getting back the lost information.
Restore RAID data from a clean and friendly interface
After the completion of the installation procedure the program can be deployed and used for getting back data from affected drives. The GUI is very simple and bent on practicality, so all the functions of the application are in plain sight and easily accessible.
Most of the space inside the main window is reserved to the list of devices that can be subjected to the recovery procedure and their corresponding details, which are neatly presented in a few columns that refer to the device name, capacity and serial number.
Simple recovery procedure, without any extra configurations
When it comes to the actual process, ReclaiMe Free RAID Recovery only needs users to select the damaged disks that will be scanned for restoring lost configuration information and then choose the appropriate type of method from those available.
Using this utility you can create a disk image with a couple of clicks and this procedure is actually recommended in case one of the RAID drives has sustained physical damage. Insofar as the supported recovery modes are concerned, this tool can be used for RAID 0, RAID 5, RAID 10 or 01, RAID 1E, RAID 5E, as well as RAID 6 or RAID ADG.
A very easy to use data recovery assistant for RAID configurations
To conclude, ReclaiMe Free RAID Recovery seems quite appropriate for basic data retrieval purposes involving RAID disks that are in some way damaged and no longer usable because the parameters of the RAID configuration are amiss.
ReclaiMe Free RAID Recovery is an application designed to help you scan your computer’s hard drives and restore software using several recovery types.
The recovery types you can select from are: RAID 0, RAID 5, RAID 6, RAID 10 (1+0 and 0+1), and RAID 1E, also it can recover and recreate array image files or write them to disk.
The program recovers the following RAID parameters: start offset and block size, number of member disks, member disk and data order, parity position and rotation.
ReclaiMe Free RAID Recovery works with hard drives (internal and external), disk image files, hardware and software RAIDs.